Lab Armor Digital Bead Bath 20 Liter

Category Bead Baths
Manufacturer Lab Armor
Country of manufacture the United States of America
Average customer rating based on 1 review
Notice
Supply chain disruptions for certain parts in Sheldon products have caused delays. Lead times for most Sheldon products are 4 to 6 weeks. We are here to assist. Please contact us to obtain lead times and discuss options.
Overview

All of the built-in features on Bead Baths were designed from the ground up to take advantage of the Lab Armor Beads and advanced capabilities of Bead Bath. They deliver exceptional temperature uniformity up to 80ºC. So one can do things with this bath that you cannot do with a typical bead-filled water bath.

Lab Armor Bead Bath vs. Water Bath

  Bead Bath Water Bath Oil Bath Sand Bath
High Thermal Efficiency Yes Yes Yes No
Microbial/Biofilm Resistant Yes No Yes Yes
Cross-contamination Resistant Yes No No No
Minimal Cleaning Yes No No Yes
No Refilling Yes No No Yes
Rack & Accessory Free Yes No No Yes
Angled Incubation Possible Yes No No Yes
Constant Volume Yes No Yes Yes
Non-Corrosive Yes No No Yes
Broad Temperature Range (-80 to 180C) Yes No Yes Yes
Non-water tight Vessel Compatibility Yes No No Yes
No Evaporation (Instrument Burn-Out Protection) Yes No Yes Yes
Always On (No Warm Up) Yes No No Yes
Mobile or Field Use Compatible Yes No No No
Non-combustible Yes Yes No Yes

 

Advantages

Uniform Temperatures: with Bead Bath designed specifically for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is an amazing +/-1.0 at 37ºC.

Always on: Bead Bath gets up and running faster and you never need to turn it off. There is nothing to evaporate.  Unlike a standard bead-filled water bath, Bead Bath allows you to achieve a new set temperature quickly, without long warm-up delays, so you can make quick adjustments on the fly.

It does what a water bath does PLUS:

Stays Clean: protected from water-borne contamination. Reduce the risk of contamination, achieve reproducible results.

Stays Organized: Unlike water baths that require racks, floats, and bottleneck weights, Bead Bath naturally holds things in place without accessories.

Saves Time: The bath always stays on, so you don’t have to plan around warmup times. You don’t need to worry about burnout either because there is no water to evaporate.

Eco-friendly: Highly recyclable beads; fewer harmful biocides; more energy efficient.

Key Attributes
Type Bead Baths
Incubation Yes
Refrigeration No
Temp Range (°C) Ambient +5 to 80
Capacity (L) 20
Circulation None
Brand Lab Armor
MaxFlow Rate (l/min) N/A
Temp Stability (°C) ±1.0
Timer No
Alarms Yes
Digital or Mechanical Digital
Data connection No
Tank Material Stainless Steel
Sample Agitation No
Media Racks Available Yes
Warranty (years) 2 Years
Weight (lb) 36
Width (in) 15.9
Depth (in) 23.35
Height (in) 8.5
Manufacturer specifications
Volume 20 L
Beads/ Fill Line 15 L
Beads Included (optional) 15L
Temperature Range
5°C above ambient to 80°C
Uniformity At 37ºC +/- 1.0ºC
Sensitivity +- 1ºC
Digital microprocessor control Yes
Over-temperature protection Yes
Easy-to-Clean Stainless Steel body and lid Yes
Exterior WxDxH (inches) 15.9 x 23.35 x 8.5
Interior WxDxH (inches) 12 x 17.1 x 6
Electrical Specifications 100-120V/6A
Shipping Weight/ Net weight (lbs) 36/22
FAQ

How does the heat transfer of Lab Armor bath beads compare to the heat transfer in a normal water bath?

Beads transfer heat more slowly than water. For small vessels this may be barely noticeable, but for large (> 500 ml) or frozen vessels the difference in heating time may be significant - as much as 2-3 times longer.

To compensate for this, you can initially heat the bath and beads to a temperature somewhat above the desired temperature, then turn the temperature of the bath back down later.

 

I noticed that the bath is meant to be left on. Why is that? Doesn't it use a lot of electricity because of this?

The beads in a bead bath do not heat as quickly as the water in a water bath, which is why it is recommended that the bath be left on. It generally does not increase energy consumption, however, and actually uses a lot less energy than a water bath would if left on at the same temperatures. For instance, a Bead Bath uses less than 25% of the energy of a similarly-sized water bath when set to 65ºC, and less than half the energy at 37ºC.

Bead Baths use less energy during operation because there is no evaporation of water taking place. A water bath normally wastes at least half of its energy by causing water to evaporate. More stable electrical draw also reduces the loading on your building’s HVAC system, which can further improve overall energy efficiency.

 

Are the Lab Armor Bead Baths UL listed?

The Lab Armor bead baths carry a TUV certification, which certifies for all applicable OSHA and CSA standards. It can be considered to have a UL-equivalent listing for regulatory purposes.

SHOW MORE SHOW LESS
SALE

select from options below to see SKU

Green Leaf
All shipments originating from Laboratory Supply Network are carbon neutral!

Do you need assistance?

We have experts standing by to assist you with your purchase. Call now at +1 603-652-1395 or contact us by clicking the button below.

Customer reviews

based on 1 review

Lab Armor Digital Bead Bath 20 Liter Accessories